KoldLok - Raised-Floor Grommets - Effective Data Centre Cooling - Stopping Cold Air Loss - Sealing Gaps in Raised-Floors - Perforated Floors - Improving Cooling Capacity
KoldLok Surface Mount L & XL Raised-Floor Grommets
For The Data Centre Environment
 Surface Mount Data Sheet (126Kb)
|
The Surface Mount L & XL raised-floor grommets are designed to fit in active raised-floors to seal larger cable openings without affecting operations. The Surface Mount L & XL units pull apart into two halves and are then positioned around the cables. Both L & XL have larger 'skirts' than the standard Surface Mount.
By sealing cable cutouts you can drastically improve the cooling capacity within the data centre.
|
|
Features
- The Surface Mount L & XL are inherently self-sealing, using multi-layered, different sized filaments which interweave and overlap.
- The fibres are cantilevered, so forcing them to close.
- There are over 3,000 filaments per cross sectional inch.
- The filaments safely dissipate any static build up off the cables that are pulled through.
- All metal components within the gommets are anodized to resist corrosion.
- Units are easily installed. Half of the unit is stuck to the floor tile using a double-sided adhesive seal which provides a strong bond and prevents the grommet from coming loose. The other half has a single-sided adhesive seal which prevents air escaping. This half can be removed to allow access to the cables.
- The Surface Mount L is designed for 10" x 10" (254mm x 254mm) cutouts
- The Surface Mouunt XL is designed for 10" x 13" (254mm x 330mm) cutouts
- Usable Opening - 8" x 4" (203mm x 102mm)
|
Best viewed at 1024 x 768 or greater
Divisions of EDP Europe
